BMW X3 Service & Repair Manual: Replacing vacuum hose for brake booster (petrol)

BMW X3 Service & Repair Manual / Brakes / Brake booster / Replacing vacuum hose for brake booster (petrol)

Necessary preliminary tasks:

  • Read and comply with GENERAL INFORMATION.
  • Remove left TRAILING LINK .
  • REMOVE left partition wall for units compartment.

IMPORTANT: Before beginning repair work, fully press the brake pedal several times to reduce the vacuum pressure in the brake servo.

Pull non-return valve (1) in direction of arrow out of brake booster.

Installation note: Check seal in brake booster and replace if necessary.

Brakes

Disconnect snap fastener (1) and feed out vacuum line (2).

Installation note: Make sure that snap fastener (1) is correctly engaged.

Brakes

    Replacing vacuum hose for brake booster (diesel fuel)
    Necessary preliminary tasks: Read and comply with GENERAL INFORMATION. Remove left TRAILING LINK . REMOVE left partition wall for units compar ...

    Electrical components/wear indicator
    ...

    Other materials:

    BMW X3 Owners Manual > Jump-starting: Preparation
    Bodywork contact between vehicles Make sure that there is no contact between the bodywork of the two vehicles; otherwise, there is a danger of short circuits. 1. Check whether the battery of the other vehicle has a voltage of 12 volts. This information can be found on the battery. 2. Switch ...

    BMW X3 Owners Manual

    BMW X3 Service & Repair Manual

    © 2017-2021 Copyright www.bmwx3tech.com - 0.0086