BMW X3 Service & Repair Manual: Removing and installing radio and a/c control panel
Special tools required:
- 00 9 340
IMPORTANT: Risk of damage!
A hard disk is installed in the Car Information Computer (CIC).
Carry out mechanical work on the CIC and adjacent components with care.
Avoid subjecting the CIC to vibration/shocks.
IMPORTANT: Read and comply with notes on protection against electrostatic damage (ESD PROTECTION) .
IMPORTANT: Carry out installation in a dust-free workshop area only.
To avoid damage, do not touch or dirty the display field.
Necessary preliminary work:
- Remove DECORATIVE STRIP ON DASHBOARD IN MIDDLE
Insert special tool 00 9 340 (00 9 341) as illustrated.
Lever trim cover (1) slightly forward and unclip.
Unclip LED (1).
Remove cover (2).
Installation note: Retaining lugs and clips must not be damaged.
Release screws.
Remove control panel (1) towards front.
Unlock associated plug connections and disconnect.
Replacement: Carry out VEHICLE PROGRAMMING/ENCODING .
Removing and installing/replacing actuator drive for central kinematics (a/c
control)
IMPORTANT:
Servomotors must be readdressed in the event of replacement!
Addressing can only be carried out with the BMW diagnosis system.
S ...
Removing and installing/renewing heating unit
WARNING: Danger of injury!
Refrigerant circuit is under high pressure!
Avoid contact with refrigerant and refrigerant fluid.
Read and comply with ...
Other materials:
BMW X3 Service & Repair Manual > Wheel bearings and stub axle: Replacing bearing for front wheel
Necessary preliminary tasks:
Remove FRONT WHEEL .
If necessary, remove visual protection cap (1).
Release collar bolt (1), press brake pedal to floor for this purpose.
Installation note:
Renew collar bolt (1) and compression spring (2).
Pay attention to installation position of co ...
BMW X3 Owners Manual
BMW X3 Service & Repair Manual
