BMW X3 Service & Repair Manual: Initializing telestart hand-held transmitter
NOTE: The Telestart hand-held transmitter must be initialized when:
- Hand-held transmitter is replaced
- Car Access System control unit is replaced
The auxiliary heater is switched on with the hand-held transmitter and at a preselected switch-on time under an ambient temperature of approx. 15 ºC.
Heating can be activated directly in the Central Information Display at any ambient temperature. To do so, go to the parking function menu under direct operation and mark the auxiliary heating box.
NOTE: Initialization can only be carried out with the BMW diagnosis system.
Follow instructions and specifications in procedure.
Service functions:
- Complete vehicle
- Body
- Air conditioning function
- Telestart transmitter
- Initialization
Removing and installing or replacing complete independent heater with
bracket
WARNING: Risk of burning!
Work on auxiliary heater may only be carried out when it has cooled down.
NOTE: CLAMP OFF coolant hoses on independent h ...
Other materials:
BMW X3 Service & Repair Manual > Starter with mounting: Replacing solenoid switch
Turn off ignition.
Remove starter motor.
Release nut (1).
Remove cable lug (2).
CAUTION:
Do not turn cable lug (2) while tightening down - risk of short circuit to starter
motor housing.
Release screws (1).
Remove solenoid switch (1) and spring (2).
Unhook pin (3).
Install ...
BMW X3 Owners Manual
BMW X3 Service & Repair Manual
