WARNING: Danger of injury! Before beginning work, position table lift with the lower frame securely on the floor.
Danger area around mechanism below platform.
Follow the operating instructions from the equipment manufacturer.
The mobile table lift is used for collision repairs and when removing large engines.
Adaptations for mounting front axle with engine and transmission.
Release star knob screw on working plate (B) of table lift; the working surface (B) can be extended by approx. 310 mm.
Release all push-pull clamps and the working plates can be shifted by approx. 20 mm.
Working plate (A and B) can be raised and lowered by 3º on the long side and by 5º on the transverse side.
Working plate (A and B) is subdivided by a coordinate system and a possible installation position is recommended in the respective repair manual.
IMPORTANT: Follow the operating instructions from the equipment manufacturer.
BMW X3 Service & Repair Manual > Body repair instructions: Opening welded connections
1. Components made of steel:
1.1 Opening welding spots (resistance pressure spot welding):
Sheet steel panels made from high- and super-high-strength materials make great demands on the
tools used.
Only with special carbide milling cutters can welding spots be drilled out on these sheet panel ...