Observe the following trolley-jack-related instructions:
1. Only trolley jacks sold or approved by BMW, with a rubber plate on their mounting, may be used! 2. Trolley jacks must be regularly serviced and always checked for functional reliability before they are used! 3. Check the rubber plate on the trolley jack prior to each use, replacing if necessary.
IMPORTANT: All-wheel drive vehicles may only be raised with the stiffening plate fitted on the front axle! Raising directly on the front axle support without stiffening plate is not permissible!
WARNING: The vehicle may be raised with a trolley jack only at the following mounting point!
NOTE: It is not permitted to raise the vehicle at the rear differential cover!
Risk of damage!
Jacking point (1) must be present! Align the rubber plate on the trolley jack to the jacking point (1) in such a way that there is no contact to adjacent components and that they are therefore not damaged.
BMW X3 Service & Repair Manual > Transfer box: Installing distributor exchange transmission (atc 450)
IMPORTANT:
Before and after replacement, execute the "Repair" service function with the BMW diagnosis
system.
Recycling:
Catch and dispose of escaping transmission oil. Observe country-specific waste disposal regulations
Necessary preliminary tasks:
Drain transmission oil at oil drai ...