WARNING: If the engine hood/bonnet contact is pulled upwards (workshop mode), the information "switch closed" is output. The automatic engine start-stop function is active.
An automatic engine start is possible.
Observe safety precautions when working on MSA vehicles.
Before carrying out practical work on the engine, always ensure that the MSA functionality is deactivated so as to prevent automatic engine starting while work is being carried out in the engine compartment.
MSA function is deactivated by:
Open engine bonnet/hood and ensure that engine hood/bonnet contact is not in workshop mode
To make sure that the engine hood/bonnet contact is at the basic setting, if necessary press the hood/bonnet contact up to the limit position before starting work and slowly release.
BMW X3 Service & Repair Manual > Front axle: Fork
Fork Mechanical tool
NOTE: (Press-off fork) For pressing the output shaft off of the front axle differential
(all-wheel drive vehicles)
SI number
01 17 05 (212)
Fork AM
NOTE: (Separating fork)
Fork AM
NOTE:
(Separating fork) for separating the conical seat at the wheel g ...