REMOVING AND INSTALLING/REPLACING FRONT UNDERBODY PROTECTION
NOTE: Illustration only an example. Detail deviations, depending on engine version, are possible.
Unfasten screws (2).
Remove front underbody protection (1).
REMOVING AND INSTALLING/REPLACING REAR UNDERBODY PROTECTION
NOTE: Schematic diagram created using the F25 28iX as an example. There may be differences in detail in the case of other models.
Release screws in area (1) and remove underbody protection (2).
REMOVING AND INSTALLING/REPLACING REINFORCEMENT PLATE
IMPORTANT: Observe safety instructions for raising the vehicle Driving without reinforcement plate is not permitted!
Necessary preliminary work:
Release screws (1).
Remove reinforcement plate (2).
BMW X3 Service & Repair Manual > Body repair instructions: Notes for repairing aluminum rims
In general, the economic viability must be checked prior to the repair.
It is possible to repair the following damage (applies to cast aluminum rims labelled as AlSi7 AlSi11,
AlSi12):
Depth of the damage in the aluminum at maximum 1 mm
Distance of the damage from the outer rim edge at maxim ...