BMW X3 Service & Repair Manual: Removing and installing/replacing guide joint in swivel bearing
Necessary preliminary work:
- Remove TENSION STRUT FROM GUIDE JOINT.
IMPORTANT: Check the rubber gaiter and circlip for damage! When removing and installing the trailing link, check the seat of the circlip seal between the trailing link and the wheel control joint and replace the wheel control joint if needed!
Release screw (1).
Remove guide joint from swivel bearing.
Installation note:
Rework thread in swivel bearing.
Keep guide joint and bore hole in swivel bearing clean and free from oil and grease.
Replace microencapsulated screw.
Removing and installing left or right wishbone
Special tools required:
31 2 242
31 2 246
31 2 240
NOTE:
If the wishbone is detached from the front axle support, it will be necessary to ...
Removing and installing/replacing left or right trailing link
Special tools required:
31 2 242
31 2 246
31 2 240
Necessary preliminary tasks:
Remove FRONT WHEEL .
Remove UNDERBODY PROTECTION.
P ...
Other materials:
BMW X3 Service & Repair Manual > Front axle: Fixture
Fixture AM
In conjunction with: UNIVERSAL HYDRAULIC LIFTING EQUIPMENT 81222219012
NOTE: (universal axle take-up) For accommodating all front and rear axles when
removing and installing.
SI number
01 24 06 (309)
Consisting of:
1. Basic body
NOTE:
(Basic body) No longer availabl ...
BMW X3 Owners Manual
BMW X3 Service & Repair Manual
