BMW X3 Owners Manual: Child restraint fixing system with a tether strap

BMW X3 Owners Manual / Controls / Transporting children safely / LATCH child restraint system / Child restraint fixing system with a tether strap

Mounting points

The respective symbol shows the anchor for the upper retaining strap.

Seats with an upper Top Tether are marked with this symbol. It can be found on the rear seat backrest or the rear window shelf.

Note

Mounting eyelets

Use the mounting eyes only for the upper retaining strap to secure child restraint systems; otherwise, the mounting eyes could be damaged.

Retaining strap guide

Retaining strap

Make sure that the upper retaining strap is not passed over the head restraints or sharp edges and is not twisted up to the upper mounting points; otherwise, the belt cannot properly secure the child restraint system in an accident.

BMW X3. Retaining strap guide

  1. Direction of travel
  2. Head restraint
  3. Hook for upper retaining strap
  4. Mounting point/eye
  5. Seat backrest
  6. Upper retaining strap

Attaching the upper retaining strap to the mounting point

1. Raise the head restraint if needed.

2. Guide the upper retaining strap between the supports of the head restraint.

3. If there is a retaining strap, run it between the backrest and the cargo cover.

4. Attach the hook of the retaining strap to the mounting eye.

5. Tighten the retaining strap by pulling it down.

6. Lower and lock head restraints as needed.

    Mounts for the lower LATCH anchors
    The lower anchors may be used to attach the CRS to the vehicle seat up to a combined child and CRS weight of 65 lb/30 kg when the child is restrain ...

    Locking the doors and windows
    Rear doors Push the locking lever on the rear doors down. The door can now be opened from the outside only. Safety switch for the rear Press ...

    Other materials:

    BMW X3 Service & Repair Manual > Luggage compartment floor: Stripping operations - replacing luggage compartment floor and both side members (tail panel removed)
    NOTE: Owing to the different engine variants and equipment specifications, not all the components are taken into consideration. The following list basically represents the removal sequence. Remove positive battery cable (61 12 002 ) Remove exhaust system. Remove heat shield ...

    BMW X3 Owners Manual

    BMW X3 Service & Repair Manual

    © 2017-2024 Copyright www.bmwx3tech.com - 0.031