REMOVING AND INSTALLING/REPLACING REAR LEFT OR RIGHT COIL SPRING
Installation note:
1. All screws, nuts, bolts and hose clamps removed during the repair must be replaced.
2. Retaining elements on chassis and suspension and steering parts must be replaced.
IMPORTANT:
- Both coil springs on the relevant axle must be replaced in the event of corrosion breakage.
- The spring pads at the top and bottom must also be renewed when replacing the coil springs.
NOTE: The process is described in THE REAR LEFT OR RIGHT SPRING STRUT.
After installation:
BMW X3 Service & Repair Manual > Rear lid: Removing and installing rear lid
Read contents of BODY, GENERAL.
Necessary preliminary tasks:
Remove trim panels on rear lid .
Disconnect all cable connectors and pull wiring harness out of tailgate.
Remove both gas-filled struts .
NOTE:
This work step must be carried out with a second person assisting.
...