BMW X3 Service & Repair Manual: General information on final drive oil
1.0 GENERAL INFORMATION ON FINAL DRIVE OIL
Final Drive oil or hypoid gear lubricant must conform with the following requirements because of the high loads which occur on the profiles of the hypoid gear teeth:
- Load carrying capacity.
- Sufficient protection against seizure.
- Good wear protection.
- Optimal friction and temperature behavior.
- Seal compatibility.
- Aging resistance.
These and other properties are already contained in brand-name hypoid gear lubricants because of the high content of EP additives (EP = extreme pressure).
OIL ADDITIVES
The factory has not approved oil additives for hypoid gear lubricants.
All final drives are designed in such a manner that they do not require any type of oil additives. Any type of additives is fundamentally rejected by the factory. BMW NA cannot accept any liability for follow-up damage resulting from the use of additives.
Wrench
Wrench AM
NOTE: (Ignition key) Discontinued, only available via complete tool
Wrench Minimum set: Mechanical tools AM
In conjunction with: 33 5 0 ...
Approved final drive oils for front and rear axle final drives with and
without limited slip or viscous coupling
2.0 APPROVED FINAL DRIVE OILS FOR FRONT AND REAR AXLE FINAL
DRIVES WITH AND WITHOUT LIMITED SLIP OR VISCOUS COUPLING
LIMITED SLIP DIFFERENTIALS
W ...
Other materials:
BMW X3 Service & Repair Manual > Rear brakes: Replacing rear left or right dust boot on brake caliper
Necessary preliminary tasks:
Remove rear BRAKE PADS.
NOTE: Dust boot can be replaced without dismantling the brake caliper and without
removing the piston.
Use original BMW repair kit.
When the repair work is complete, please pay attention to the following:
Check brake pads ...
BMW X3 Owners Manual
BMW X3 Service & Repair Manual
