NOTE: Camber and toe-in influence each other. Adjust the toe-in first in order to simplify the adjustment procedure.
Version with active steering:
Version without active steering:
Remove front UNDERBODY PROTECTION .
Move steering into straight-ahead driving position by means of markings on cap (1) and steering box (2).
Align steering wheel and secure with steering wheel arrester.
Clean thread on track rod.
Slacken clamping nut (2), gripping track rod end (1) in the process.
Remove clamp (4).
Turn track rod (3) to adjust toe-in to setpoint value.
Version with active steering: Check total steering angle; if necessary, set to "zero".
Check toe values, repeat adjustment if necessary.
Tighten down clamping nut (2).
Fit clamp (4).
After installation:
BMW X3 Service & Repair Manual > Steering and wheel alignment: Clamp
Clamp Minimum set: Mechanical tools Mechanical tool
NOTE: For locating electric motor on hydraulic unit valve body
Storage Location
B44
SI number
01 10 02 (907)
Clamp Minimum set: Mechanical tools Mechanical tool
NOTE: For locking middle position of steering box
Storage Location
B44
SI n ...