BMW X3 Service & Repair Manual: Stationary wheel balancing

BMW X3 Service & Repair Manual / Suspension / Wheels / Stationary wheel balancing

Special tools required:

  • 36 1 010
  • 36 1 020

Necessary preliminary tasks:

  • Remove WHEEL.

IMPORTANT: Use only BMW-approved balance weights.

Remove any fitted balancing weights, stones in tread pattern and larger dirt contaminations.

Check tire pressure and tire for condition, damage, flat spots (irregularities caused by e.g. parking of vehicle with tires which have run hot). If necessary, check WHEEL AND TIRE for radial and lateral runout.

Suspension

Use BMW-approved wheel centering elements of relevant balancing machine manufacturers.

  1. Basic flange
  2. Wheel centering element
  3. Type flange
  4. Clamping nut

Suspension

IMPORTANT: To avoid clamping errors, it will be necessary to fit the wheel on the balancing machine in the same way (e.g. valve facing down) as it is then fitted on the vehicle.

Balance wheel in accordance with operating instructions of relevant balancing machine.

On light-alloy rims with distinctive J-shape rim flange, proceed as follows:

  1. Gently force off tire sidewall with special tool 36 1 020 at appropriate point from rim flange.
  2. Install retaining clip (1).
  3. Remove special tool 36 1 020 .

Suspension

Raise retaining clip with special tool 36 1 010. Slide balance weight underneath and allow it to snap into place.

Suspension

Arrangement of balance weights for light-alloy rims with distinctive J-shape rim flanges.

  1. Retaining spring
  2. Balance weight

Adhesive weights must be used on all other light-alloy rims.

Max. imbalance.

Suspension

NOTE: When using adhesive weights, proceed as follows:

  1. Carefully remove any adhesive weights. Do not damage wheel rim when doing so.
  2. Select suitable location for fitting.
  3. Clean adhesive area thoroughly.
    Remove or install front or rear wheel
    Special tools required: 36 1 300 81 25 2 344 011 36 1 335 36 1 010 IMPORTANT: Wheel was balanced electronically. Observe safety ...

    Disc wheels (rims)
    ...

    Other materials:

    BMW X3 Service & Repair Manual > HVAC: Cabin air filter applications
    NOTE: This article is generic in nature and applies to many different makes and models. We do our best to determine which vehicles do and do not have a cabin air filter. The vehicle you have selected may not be equipped with a factory-installed cabin air filter or the manufacturer does not pro ...

    BMW X3 Owners Manual

    BMW X3 Service & Repair Manual

    © 2017-2024 Copyright www.bmwx3tech.com - 0.0289