BMW X3 Service & Repair Manual: Replacing oil accumulator (GA8HP45Z)

IMPORTANT:

  • Do not let skin come in contact with transmission oil and do not inhale fuel vapors.
  • Wear protective gloves.
  • Ensure adequate ventilation.

IMPORTANT: Applicable to vehicles from 08/2011 Remove transmission oil sump only after it has cooled down.

After completion of repair work, check TRANSMISSION OIL LEVEL .

Use only the approved TRANSMISSION OIL .

Failure to comply with this requirement will result in serious damage to the automatic transmission!

Installation note: The transmission oil sump must be renewed every time it is removed.

Necessary preliminary tasks:

  • REMOVE TRANSMISSION OIL SUMP.

Recycling:

Catch and dispose of escaping transmission oil.

Observe country-specific waste disposal regulations.

Release screws (1) (M6x20).

Release screw (2) (M6x59).

Carefully unlock connector (3) with screwdriver.

Carefully pull out oil accumulator.

IMPORTANT: Mounting bolts of oil accumulator must be replaced after removal.

Transmission

    Hydr/el control components/elements
    ...

    Replacing oil reservoir (GA8HP70Z)
    IMPORTANT: Do not let skin come in contact with transmission oil and do not inhale fuel vapors. Wear protective gloves. Ensure adeq ...

    Other materials:

    BMW X3 Service & Repair Manual > Rear axle: Synchronising key
    Synchronising key AM Storage Location Y4 Synchronising key AM NOTE: For ball bearing, inner Synchronising key AM Synchronising key AM NOTE: (Thrust piece (for removing)) Deletion, only available via tool set Storage Location C53 SI number 01 18 05 (214) Synchronising key AM NOTE ...

    BMW X3 Owners Manual

    BMW X3 Service & Repair Manual

    © 2017-2024 Copyright www.bmwx3tech.com - 0.0294