REPLACING TORQUE CONVERTER RADIAL SHAFT SEAL (GA8HP45Z)
Special tools required:
IMPORTANT:
- Do not let skin come in contact with transmission oil and do not inhale transmission oil vapors.
- Wear protective gloves.
- Ensure adequate ventilation
IMPORTANT: After completion of work, check TRANSMISSION OIL LEVEL .
Use only approved TRANSMISSION OIL .
Failure to comply with this instruction will result in serious damage to the transmission.
Necessary preliminary work:
Secure transmission with special tool 24 0 200 on assembly stand 00 1 450.
NOTE: Read and comply with note on installation of TRANSMISSION RETAINING BRIDGE .
Pull out radial shaft seal (1) with special tools 24 1 420 and 13 5 250 .
The 14 aluminum torx screws contained in the drive repair kit are furnished with a sealing ring and must be mandatory replaced as well.
When replacing screws (1) along the dashed line, always change one screw after the other.
Installation note:
BMW X3 Service & Repair Manual > DTC: Brake pad replacement reminder
NOTE: To determine the appropriate reset procedure, refer to BRAKE PAD
REPLACEMENT REMINDER RESET INDEX. Only vehicles listed in this index
have a specific brake pad warning light reset procedure. For other vehicles,
perform PROCEDURE 1 first. If light does not reset, perform PROCEDURE 2. If
the ...