Adapter Minimum set: Mechanical tools Mechanical tool
NOTE: (Adapter ring) For driving in radial shaft seal on output shaft.
Storage Location
B25
SI number
01 18 08 (482)
Adapter AM
Replaced by: 83300495492
NOTE: Replaced by 24 0 205 (0 495 492)
Storage Location
C42
NOTE: (Adapter (short)) Deletion, only available via tool set
SI number
01 27 06 (328)
Adapter Mechanical tool
NOTE: For testing the pump pressure
Storage Location
A4
Adapter Mechanical tool
NOTE: For pressure gauge 13 3 061 for checking oil pressure in transmission
Storage Location
A4
SI number
01 03 90 (184)
Adapter AM
NOTE: (Adapter (long)) Deletion, only available via tool set
SI number
01 27 06 (328)
NOTE: (Adapter (medium)) Deletion, only available via tool set
SI number
01 27 06 (328)
Adapter Mechanical tool
NOTE: For pressure gauge 13 3 061/For checking the converter pressure
Storage Location
A4
Adapter Minimum set: Mechanical tools AM
NOTE: For closing the feed and return lines when checking the main pressure/transmission: 3 HP 22 Deletion, only available via tool set
Storage Location
C3
Angle
Angle Mechanical tool
NOTE: (Sheet metal part) Retaining plate for disc package. Not needed as of transmission number 11 2 300
Storage Location
Z4
SI number
01 09 90 (282)
BMW X3 Service & Repair Manual > Starter lead: Replacing positive battery cable between starter motor, alternator and
positive battery connection point (N55)
Necessary preliminary work:
Read out the fault memory of the DME control unit.
Switch off ignition.
Disconnect BATTERY EARTH LEAD .
REMOVE intake plenum.
Fold back cover (1).
Release nut underneath. Remove positive battery cable from battery positive terminal.
Remove protective ca ...