BMW X3 Service & Repair Manual: Device

Device Minimum set: Mechanical tools Mechanical tool

NOTE: (funnel) For filling the transmission with transmission oil

NOTE: (Tensioning device) For removal and installation of the snap ring before the centring plate on ZF transmissions

NOTE: (device) For determining the shims on the brake C

Storage Location

Y6

SI number

01 14 93 (718)

Device Minimum set: Mechanical tools AM

NOTE: (Pulling device) For pulling off the radial seal of the selector shaft/transmission with positioning switch

Storage Location

B3

SI number

01 02 95 (896)

Consisting of:

1. Use
2. Bush

Device AM

NOTE: For leak-testing the torque converter

Storage Location

X6

Consisting of:

1. Basic body

NOTE: (Basic body) transmission: 3 HP 12, 4 HP 24

2. Screw

NOTE: (Retaining screws (2 x)) Transmission: 3 HP 12

3. Clip

NOTE: (Retaining clip) transmission: 3 HP 12, 4 HP 24, A4S 270R, A4S 310R

4. Screw

NOTE: (Retaining screws (2 x)) for torque converter/transmission: 4 HP 24, A4S 270R, A4S 310R

Device AM

NOTE: (Dismantling and mounting device) For removing and installing the D/E cylinder with planetary gear set. Discontinued as of 10/2010.

Storage Location

Y5

Y6

SI number

01 01 95 (892)

Consisting of:

1. Handle

NOTE: Discontinued as of 10/2010

2. Spindle

NOTE: (Spindle with knurled nut) Discontinued as of 10/2010

3. Bush

NOTE: (Centring bush) Discontinued, can only be ordered as part of complete tool 11 4 200 = 0491020.

Device Minimum set: Mechanical tools Mechanical tool

NOTE: (locating fixture) For securing converter during removal and installation of transmission.

Storage Location

A20

B20

SI number

01 23 05 (224)

Device AM

NOTE: (Retainer) for removing and installing the disc set

Storage Location

Z7

Consisting of:

1. Washer
2. Ring
3. Shell

NOTE: (Bearing shell) 2 pieces

Device Minimum set: Mechanical tools AM

NOTE: For removing and installing the radial shaft seal of the gearshift shaft 24 5 361, 24 5 362, 24 5 364 and 24 5 366 for E90

Storage Location

C4

SI number

01 14 96 (105)

Consisting of:

6 = Bush

NOTE: For fitting the radial shaft seal on the selector shaft (emergency release) Transmission: GA6 HP26Z Deletion, only available via tool set

1 = Bush

NOTE: (Threaded bush)

2 = Nut

NOTE: (Union nut) Deletion, only available via tool set

3 = Bush

NOTE: For transmission without positioning switch Transmission: A4S 310R Deletion, only available via tool set

4 = Nut

5 = Holding sleeve

NOTE: (Sliding sleeve (5 pieces)) Transmission: A4S 310R Deletion, only available via tool set

Device Mechanical tool

NOTE: (Device) For leakage test of torque converter

Storage Location

X6

Device AM

NOTE: Removal and mounting device) For removing and installing the drive clutch A/B/C

Storage Location

Y2

Z2

SI number

01 01 95 (892)

Consisting of:

1. Pipe

NOTE: (Jack tube with ring bolt)

2. Pin

NOTE: (Locking pin)

Device AM

NOTE: (Device)

Storage Location

A23

Individual

Consisting of:

1. Basic body

NOTE: (Basic body)

2. Screw

NOTE: (Mounting bolt (2 pieces))

NOTE: (Lifting gear) For removing and installing the brake clutch unit D/G incl. the parking lock gear

Storage Location

Y3

Z3

SI number

01 14 93 (718)

NOTE: For removing the sealing cap for working piston, clutch 4

Storage Location

C42

SI number

01 04 02 (835)

Consisting of:

1. Pliers
2. Adapter
3. Washer

Device Minimum set: Mechanical tools Mechanical tool

NOTE: For E72 hybrid. For removing and installing the ORC clutch.

SI number

01 18 10 (660)

Device Mechanical tool

NOTE: For leak-testing the torque converter

NOTE: (Pressing device) For removing and installing the piston (cover) at brake C

Storage Location

Y6

SI number

01 14 93 (718)

Device AM

NOTE: (Device) Tool set for dismantling and fitting the R gear piston. For dismantling and assembling the transmission for "Sealing the intermediate plate".

SI number

01 22 97 (239)

Consisting of:

1. Plate

NOTE: (Pressure plate) For removing and installing the spring cup

2. Spindle

NOTE: (Spindle with pressure plate) Spindle M14x1.5, nut M14, pressure plate and washer/For removing and installing the spring cup

3. Pin

NOTE: (Guide pin (2 pieces)) For fixing the gaskets and the intermediate plate on the intermediate case

4. Bush

NOTE: (Slip bush) For installing the piston in the cylinder of the intermediate plate

Device Mechanical tool

NOTE: For fixing torque converter in position while removing and installing transmission.

Storage Location

Individual

Device AM

NOTE: For checking the side clearance of the drive shaft

Storage Location

Y3

Consisting of:

1. Holder

NOTE: (Dial gauge holder)

2. Terminal

NOTE: (Terminal)

Device AM

NOTE: For removing and installing oil pump

Storage Location

Z1

Z2

SI number

01 09 90 (282)

Consisting of:

1. Pipe

NOTE: (Holding tube) discontinued, available as part of set of special tools only

2. Spindle

NOTE: (Threaded spindle) Deletion, only available via tool set

3. Ring

NOTE: (Clamping ring) discontinued, available as part of set of special tools only

4. Ring

NOTE: (Clamping ring) Gearbox: GA6HP19Z, GA6HP26Z Deletion, only available via tool set

Device AM

NOTE: (Assembly and disassembly tool) For removing and installing brake clutch F

Storage Location

Z3

Z4

SI number

01 01 95 (892)

Consisting of:

1. Handle

NOTE: (Handle)

2. Nut

NOTE: (Knurled nut) Replaced by 00 9 120 (0 490 504)

3. Handle

NOTE: (Centring handle)

Device Minimum set: Mechanical tools Mechanical tool

NOTE: To secure the converter when removing and installing the transmission.

Storage Location

B30

SI number

01 27 11 (764)

Device Mechanical tool

Replaced by: 83300491731

NOTE: For firmly holding torque converter in position while removing and fitting the transmission. Replaced by 24 4 130 (0 491 731)