Special tools required:
IMPORTANT: Use only the approved TRANSMISSION OIL in the transfer box.
Failure to comply with this requirement will result in serious Information damage to the transfer box!
NOTE: Only change oil when transfer box is at normal operating temperature.
Necessary preliminary task:
Undo oil filler plug (1).
Installation note: Renew oil filler plug with O-ring.
Place oil collecting apparatus underneath.
Use special tool 00 2 080 to draw off and dispose of transmission oil.
Use special tool 00 2 080 to top the transmission oil up to the lower edge of the filler screw opening.
BMW X3 Service & Repair Manual > Side frame and door pillars: Replace B-pillar, outer left
Procedure OBSERVE repair stage 3!
Read contents of BODY, GENERAL.
Use only an approved SPOT-WELDING APPARATUS for repairs!
Following new body parts are required (see OVERVIEW OF CONSUMABLES):
(1) A-pillar with entrance
Shaped part, B-pillar bottom outside
Removal:
Mark severance c ...