BMW X3 Service & Repair Manual: Installing exchange transfer box (atc 45l)
IMPORTANT: Before and after replacement, execute the "Repair" service function with the BMW diagnosis system.
Recycling: Catch and dispose of escaping transmission oil. Observe country-specific waste disposal regulations Necessary preliminary tasks:
- Drain GEAR OIL at oil drain plug.
- Remove TRANSFER BOX.
Remount the following parts:
- Covers and protective caps
- Drive shaft transportation retainer
- Vent hose of transfer box.
- REPLACE RUBBER MOUNT FOR TRANSFER BOX MOUNTING IF REQUIRED .
IMPORTANT: After completing work, check gear oil level and top up if necessary.
Undo oil filler plug (1).
Check oil level.
Top up transmission oil up to lower edge of opening for oil filler plugs (1).
Use only approved GEARBOX OIL .
Failure to comply with this requirement will result in serious damage to the transfer box.
After replacement: Repair service function CARRY OUT PROGRAMMING/ENCODING .
Installing distributor exchange transmission (atc 450)
IMPORTANT:
Before and after replacement, execute the "Repair" service function with the BMW diagnosis
system.
Recycling:
Catch and dispose ...
Removing and installing transfer box (atc 450)
Special tools required:
00 2 030
23 4 050
IMPORTANT:
Before and after replacement, execute the "Repair" service function with the BMW di ...
Other materials:
BMW X3 Service & Repair Manual > Troubleshooting: Notes/information on start assistance (jump starting)
Do not start the engine with help of starting sprays.
Preparation:
Conform with the following when starting the engine with a jump starting cable.
Ensure that the jump starting cable wires are of appropriate cross-section size.
Only use fuse-protected jump starting cables.
Check whether ...
BMW X3 Owners Manual
BMW X3 Service & Repair Manual
