Special tools required:
IMPORTANT: Before and after replacement, execute the "Repair" service function with the BMW diagnosis system.
IMPORTANT: After completion of work, CHECK TRANSMISSION OIL LEVEL and top up if necessary.
Failure to comply with this requirement will result in serious damage to the transfer box!
Necessary preliminary work:
NOTE: Support transmission with special tools 00 2 030 , 23 4 050 .
Release screws.
Remove transmission cross member.
Release screw (1), detach earth strap.
Unplug connector (1) from VTG control unit (linear force module) (3).
Release screw connection (1) of transfer box.
Take off transfer box (2).
Installation note:
Pay attention to dowel pin (1).
Grease dowel pin (1).
Apply a thin coat of grease to gearing.
Grease: WEICON ANTI-SEIZE.
BMW X3 Owners Manual > Tailgate: Automatic tailgate operation
Adjusting the opening height
You can set how far the tailgate should open.
Adjusting the opening height
When adjusting the opening height, ensure
that there is a clearance of at least
4 in/10 cm above the tailgate. Otherwise, the
ceiling may not be high enough for the open
tailgate if the loa ...