BMW X3 Service & Repair Manual: Replacing output flange for front axle output (atc 450)
IMPORTANT: Do not move vehicle with drive power once propeller shaft has been removed.
Replace output flange only together with a new radial shaft seal.
After completion of work, check gearbox oil level.
Use only the approved TRANSMISSION OIL .
Failure to comply with this requirement will result in serious damage to the transfer box!
Operation is identical to REPLACING RADIAL SHAFT SEAL FOR FRONT AXLE OUTPUT.
REPLACING OUTPUT FLANGE FOR OUTPUT TO THE FRONT AXLE (ATC 45L)
IMPORTANT: Do not move vehicle with drive power once propeller shaft has been removed.
Replace output flange only together with a new radial shaft seal.
After completion of work, check GEARBOX OIL LEVEL.
Use only the approved TRANSMISSION OIL .
Failure to comply with this requirement will result in serious damage to the transfer box!
Operation is identical to REPLACING RADIAL SHAFT SEAL FOR FRONT AXLE OUTPUT.
Removing and installing transfer box (atc 45l)
Special tools required:
00 2 030
23 4 050
IMPORTANT:
Before and after replacement, execute the "Repair" service function with the BMW di ...
Replacing output flange on rear transfer box (atc 45l)
IMPORTANT:
After completing work, check TRANSMISSION OIL LEVEL and top up if necessary.
Use only the approved TRANSMISSION OIL .
NOTE:
Re ...
Other materials:
BMW X3 Service & Repair Manual > Steering and wheel alignment: Mandrel
Mandrel Mechanical tool
NOTE:
(Drift) For driving the radial seal ring out of the bearing bush of the rack-and-
pinion hydraulic steering
Storage Location
C16
SI number
01 05 95 (932)
Mandrel Mechanical tool
NOTE: (Drift) for radial sealing ring in the valve body/steering box
Storage Lo ...
BMW X3 Owners Manual
BMW X3 Service & Repair Manual
