BMW X3 Service & Repair Manual: Replacing output flange on rear transfer box (atc 45l)
IMPORTANT: After completing work, check TRANSMISSION OIL LEVEL and top up if necessary.
Use only the approved TRANSMISSION OIL .
NOTE: Replace output flange only together with a new radial shaft seal.
Procedure for removing output flange is identical to replacing RADIAL SHAFT SEAL.
Installation note:
- Thickness of new shim must be determined before output flange is installed.
Determine and note down dimension A of output flange (old and new).
Determine and note down dimension B of output flange (old and new).
Determine old dimension C, thickness of shim.
Installation note:
Calculate thickness of new shim:
1. Add old dimension A of output flange (previous) and old dimension C of shim Then subtract old dimension B from old result A+C 2. Subtract dimension B from dimension A of output flange (new) 3. Then subtract result of step 2 from result of step 1.
Replacing output flange for front axle output (atc 450)
IMPORTANT:
Do not move vehicle with drive power once propeller shaft has been removed.
Replace output flange only together with a new radial ...
Replacing output flange on transfer box at rear (atc450)
IMPORTANT:
After completing work, check transmission oil level and top up if necessary.
Use only the approved TRANSMISSION OIL .
NOTE:
...
Other materials:
BMW X3 Owners Manual > Tailgate: Opening
The tailgate swings back and up when it
opens.
Ensure that adequate clearance is available
before opening.
Opening from the outside
Press button next to the tailgate.
Press button on the remote
control
for approx. 1 second.
As the case may be, the doors are also unlocked.
...
BMW X3 Owners Manual
BMW X3 Service & Repair Manual
