BMW X3 Service & Repair Manual: Replacing radial shaft seal for actuator shaft (atc 45l)
Special tools required:
- 11 1 200
- 11 1 380
- 23 0 490
IMPORTANT: Read and comply with notes on protection against electrostatic discharge (ESD protection).
After completion of the repair work, CHECK TRANSMISSION OIL LEVEL and top up if necessary.
Use only the approved TRANSMISSION OIL .
Necessary preliminary tasks:
- Disconnect BATTERY EARTH LEAD
- Remove CROSS MEMBER .
Disconnect connector (1).
Release screws (2) and remove transfer box from control unit (longitudinal torque module) (3).
Screw special tool 23 0 490 into radial shaft seal.
Drive out radial shaft seal (1) with impact weight (2).
Push the assembly sleeve 11 1 380 over the actuator shaft.
IMPORTANT: Nonobservance involves a risk of damage to the radial shaft seal.
Slide the new radial shaft seal (1) over the assembly sleeve (2) onto the actuator shaft.
Drive radial shaft seal fully home using special tool 11 1 200 and plastic hammer.
Remove the assembly sleeve.
Replacing radial shaft seal for actuator shaft (atc 450)
Special tools required:
11 1 200
11 1 380
23 0 490
IMPORTANT:
Read and comply with notes on protection against electrostatic discha ...
Replacing radial shaft seal for drive flange (atc 450)
Special tools required:
23 0 490
27 1 430
IMPORTANT:
After completion of work, CHECK TRANSMISSION OIL LEVEL and top up if necessary.
...
Other materials:
BMW X3 Owners Manual > Cargo area: Cargo cover
Closing
Pull out the cargo cover, arrow 1, and hook
both sides into the brackets, arrow 2.
Hook the cargo cover on both sides
Hook the cargo cover on both sides to
prevent damaging the cover.
Do not deposit heavy objects
Do not deposit heavy or hard objects on
the cargo cover. Otherwise, t ...
BMW X3 Owners Manual
BMW X3 Service & Repair Manual
