BMW X3 Service & Repair Manual: Replacing radial shaft seal for drive flange (atc 450)
Special tools required:
- 23 0 490
- 27 1 430
IMPORTANT: After completion of work, CHECK TRANSMISSION OIL LEVEL and top up if necessary.
For this transfer box, use approved TRANSMISSION OIL only.
Necessary preliminary tasks:
- Remove TRANSFER BOX.
Drive a hole into radial shaft seal (1) using a center punch (2).
IMPORTANT: Do not use a drill as drillings may result in transmission malfunction.
Screw special tool 23 0 490 into radial shaft seal.
Drive out radial shaft seal (1) with impact weight (2).
Installation note:
Coat sealing lips of new radial shaft seal with clean transmission oil.
Drive in radial shaft seal with special tool 27 1 430 .
Reassemble the vehicle.
Check oil level.
Check transmission for leaks.
Replacing radial shaft seal for actuator shaft (atc 45l)
Special tools required:
11 1 200
11 1 380
23 0 490
IMPORTANT:
Read and comply with notes on protection against electrostatic discharge ...
Replacing radial shaft seal for output flange (atc 450)
Special tools required:
27 1 440
IMPORTANT:
After completing repair work, check transmission oil level and top up if necessary.
For th ...
Other materials:
BMW X3 Service & Repair Manual > Transmission fluid change intervals (if applicable): Fluid maintenance service interval for hybrid f30, f10, f02 - service
bulletin si b24 07 12 (8/2015)
Applies to the following models:
F30 (ActiveHybrid 3)
F10 (ActiveHybrid 5)
F02 (ActiveHybrid 7)
The automatic transmission fluid is required to be changed at every second or third engine oil service
depending on the production date of the vehicle ("connected" maintenance service to the ...
BMW X3 Owners Manual
BMW X3 Service & Repair Manual
