BMW X3 Owners Manual: Display

The following is displayed in the instrument cluster:

Speed limit detection

Current speed limit.

Speed limit detection is not available.

Speed limit detection can also be displayed in the Head-up Display.

System limits

The system may not be fully functional and may provide incorrect information in the following situations:

  • In heavy fog, rain or snowfall.
  • When signs are concealed by objects.
  • When driving very close to the vehicle in front of you.
  • When driving toward bright lights.
  • When the windshield behind the interior rearview mirror is fogged over, dirty or covered by a sticker, etc.
  • In the event of incorrect detection by the camera.
  • If the speed limits stored in the navigation system are incorrect.
  • In areas not covered by the navigation system.
  • When roads differ from the navigation, such as due to changes in road routing.
  • When passing buses or trucks with a speed sticker.
  • If the traffic signs are non-conforming.
  • During calibration of the camera immediately after vehicle shipment.
    At a glance
    Camera The camera is found near the interior rearview mirror. Keep the windshield in the area behind the interior rearview mirror clean and clea ...

    Selection lists in the instrument cluster
    The concept Depending on your vehicle's optional features, the following can be displayed or operated using the buttons and the thumbwheel on the ...

    Other materials:

    BMW X3 Service & Repair Manual > Starter with mounting: Removing and installing/replacing starter motor (N55)
    Necessary preliminary tasks: Switch off ignition. Disconnect BATTERY NEGATIVE LEAD . Remove INTAKE PLENUM . Unlock connector (1) and remove. Release nuts (2) and disconnect positive battery cables. Release screws (3). Remove starter motor (4). Installation note: Check start ...

    BMW X3 Owners Manual

    BMW X3 Service & Repair Manual

    © 2017-2024 Copyright www.bmwx3tech.com - 0.0103