BMW X3 Owners Manual: Automatic headlight control

Position of switch : the low beams are activated and off automatically, e.g., in tunnels, in twilight or if there is precipitation. The indicator lamp in the instrument cluster lights up.

When emerging from a tunnel during the day, the low beams are not switched off immediately but instead only after approx. 2 minutes.

A blue sky with the sun low on the horizon can cause the lights to be switched on.

The low beams always stay on when the fog lights are activated.

Personal responsibility

The automatic headlight control cannot serve as a substitute for your personal judgment in determining when to turn the lights on in response to ambient lighting conditions.

E. g. the sensors are unable to detect fog or hazy weather. To avoid safety risks under these conditions, you should always switch on the lights manually.

    General information
    Position of switch: , , If the driver door is opened with the ignition switched off, the exterior lighting is automatically switched off at these ...

    Daytime running lights
    With the ignition switched on, the daytime running lights light up in position , or . After the ignition is switched off, the parking lights lig ...

    Other materials:

    BMW X3 Service & Repair Manual > Control arms and struts: Removing and installing/replacing left or right camber arm
    IMPORTANT: If the camber arm is bent, the control arm/wheel carrier screw connection must be renewed. NOTE: If the camber arm is renewed, the wheel alignment . Necessary preliminary work: Remove REAR WHEEL . Support wheel carrier with workshop jack! Mark position of eccentric adj ...

    BMW X3 Owners Manual

    BMW X3 Service & Repair Manual

    © 2017-2024 Copyright www.bmwx3tech.com - 0.009