The High-beam Assistant can be switched off when manually adjusting the light. To reactivate the High-beam Assistant, press the button on the turn signal lever.
System limits
The system is not fully functional in situations such as the following, and driver intervention may be necessary:
BMW X3 Service & Repair Manual > Control arms and struts: Replacing an upper wishbone
IMPORTANT:
The wishbone must be installed with the opening (U-section) facing downward!
If the wishbone is bent, the screw connection between the control arm and wheel carrier
must be replaced.
Necessary preliminary work:
Remove REAR WHEEL .
Release left and right scr ...