Reset the system after each adjustment of the tire inflation pressure and after every tire or wheel change.
On the Control Display and on the vehicle:
1. "Vehicle info"
2. "Vehicle status"
3. "Perform reset"
4. Start the engine - do not drive off.
5. Reset tire inflation pressure: "Perform reset".
6. Drive away.
The tires are shown in gray and the status is displayed.
After driving faster than 19 mph/30 km/h for a short period, the set tire inflation pressures are accepted as reference values. The reset is completed automatically while driving.
The progress of the reset is displayed.
After a successfully completed Reset, the wheels on the Control Display are shown in green and "Tire Pressure Monitor (TPM) active" is displayed.
You may interrupt this trip at any time. When you continue the reset resumes automatically.
BMW X3 Service & Repair Manual > Electronic chassis alignment: Notes on replacement of steering gear/steering column/steering shaft
following accident damage
Steering gear facts:
In the event of accidents or driving conditions similar to accidents, shock-like loads can cause different types of
damage to steering boxes. When a steering box is externally undamaged, it is sometimes only possible to
identify damage with great difficulty and with great ef ...