BMW X3 Owners Manual: Warning with braking function
Display If a collision with a person detected in this way is imminent, a warning symbol appears on the instrument cluster and in the Head-up Display.
The red symbol is displayed and
a signal
sounds.
Intervene immediately by braking or make an evasive maneuver.
Braking intervention The warning prompts the driver himself/herself to react. During a warning, the maximum braking force is used. Premise for the brake booster is sufficiently quick and hard stepping on the brake pedal. The system can assist with some braking intervention if there is risk of a collision. At low speeds vehicles may thus come to a complete stop.
The braking intervention is executed only if DSC Dynamic Stability Control is switched on and Dynamic Traction Control DTC is activated.
The braking intervention can be interrupted by stepping on the accelerator pedal or by actively moving the steering wheel.
Object detection can be restricted. Limitations of the detection range and functional restrictions are to be considered.
Switching on/off
Switching on automatically
The system is automatically active after every
driving-off.
Switching on/off manually
Press button briefly:
The ...
System limits
Detection range
The detection potential of the camera is limited.
Thus a warning might not be issued or be issued
late.
E. g. the following si ...
Other materials:
BMW X3 Service & Repair Manual > Alternator with drive and mounting: Removing and installing or replacing alternator (N20, N26)
Necessary preliminary tasks:
Switch off ignition
Disconnect BATTERY EARTH LEAD and cover.
Remove INTAKE SILENCER HOUSING .
Remove CLEAN AIR PIPE , top.
Remove TENSIONING DEVICE for drive belt.
Release screws (1).
Unlock connector (1) and remove.
Release nut (2) and remove the po ...
BMW X3 Owners Manual
BMW X3 Service & Repair Manual
