Closing
Pull out the cargo cover, arrow 1, and hook both sides into the brackets, arrow 2.
Hook the cargo cover on both sides
Hook the cargo cover on both sides to prevent damaging the cover.
Do not deposit heavy objects
Do not deposit heavy or hard objects on the cargo cover. Otherwise, they may pose a risk to occupants, such as during braking and evasive maneuvers.
Do not let the cargo cover snap back into place
Do not allow the cargo cover to snap back into place; this can damage it.
BMW X3 Service & Repair Manual > Output shafts: Removing and installing/replacing both output shafts
IMPORTANT:
The RADIAL SHAFT SEAL FOR THE OUTPUT SHAFT should be renewed every
time the output shaft is removed and installed.
The circlip of the output shaft must be replaced after re-installation.
NOTE: The procedure is described in PRESSING OUTPUT SHAFT OUT OF DRIVE
FLANGE AN ...