BMW X3 Owners Manual: Removing and inserting

BMW X3 Owners Manual / Controls / Interior equipment / Cargo area / Removing and inserting

Cargo cover without cargo area partition net: Removing The cover can be removed to load bulky luggage.

BMW X3. Removing and inserting

Reach under the cover and turn it upward, arrows.

Pull the cover back horizontally.

Cargo cover with cargo area partition net: Removing The cover can be removed to load bulky luggage.

1. Press button, arrow 1, to unlock the cover.

BMW X3. Removing and inserting

2. Pull the cover back, arrow 2.

Installing Slide the cover forward horizontally into the two side brackets until it audibly latches.

The red warning fields disappear in the case of a cover with cargo area partition net.

Tug on the cover to check if it is properly locked in place.

Cargo cover

Closing Pull out the cargo cover, arrow 1, and hook both sides into the brackets, arrow 2. Hook the cargo cover on both sides Hook the cargo cov ...

Enlarging the trunk

General information The cargo area can be enlarged by folding down the rear seat backrest. The rear seat backrest is divided into two parts at a ...

Other materials:

BMW X3 Service & Repair Manual > Automatic transmission: Adapter
Adapter Minimum set: Mechanical tools Mechanical tool NOTE: (Adapter ring) For driving in radial shaft seal on output shaft. Storage Location B25 SI number 01 18 08 (482) Adapter AM Replaced by: 83300495492 NOTE: Replaced by 24 0 205 (0 495 492) Storage Location C42 NOTE: (Ada ...