Do not let the cargo area partition net back into place
Do not allow the cargo area partition net to snap back into place; otherwise, there is a danger of injury and the cargo area partition net could be damaged.
With a normal cargo area
1. Fold open the rear covers on the roofliner.
2. Pull the cargo area partition net out of the case by the strap.
3. Insert the bars into the brackets on both sides in the roofliner toward the front, arrow. This is best performed from the rear seat.
If the cargo area partition net is no longer needed: proceed in reverse order.
With an enlarged cargo area
1. Fold down the entire rear seat backrest.
2. Press button, arrow 1, to unlock the case on both sides.
3. Pull the case rearward out of the two side brackets, arrow 2. Make sure not to tilt it in the process.
4. Slide the case all the way into the guides, arrows 1, on the backs of the backrests.
5. Fold open the front covers on the roofliner.
6. Carefully pull out the cargo area partition net and insert it into the brackets as in the normal cargo area.
If the cargo area partition net is no longer needed: proceed in reverse order.
Finally, slide the case forward into the two brackets on the sides, until it engages. The red warning fields disappear.
Ski and snowboard bag
General information The ski and snowboard bag is contained in a protective jacket in the cargo area.
Follow the installation and operation instructions included in the protective jacket.
BMW X3 Owners Manual > Washer/wiper system: Switching the wipers on/off and brief
wipe
Hints
Do not activate wipers if frozen to windshield
Do not switch on the wipers if they are frozen
to the windshield; otherwise, the wiper blades
and the wiper motor may be damaged.
Do not activate wipers on dry windshield
Do not use the wipers if the windshield is
dry, as this may damage th ...