Immediately drive approx. 5 miles/10 km to ensure that the sealant is evenly distributed in the tire.
Do not exceed a speed of 50 mph/80 km/h.
If possible, do not drive at speeds less than 12 mph/20 km/h.
To correct the tire inflation pressure
1. Stop at a suitable location.
2. Screw the connection hose of the compressor directly onto the tire valve stem.
3. Insert the connector into the power socket inside the vehicle.
4. Correct the tire inflation pressure to 2.5 bar.
Continuing the trip
Do not exceed the maximum permissible speed of 50 mph/80 km/h.
Reinitialize the Flat Tire Monitor.
Reinitialize the Tire Pressure Monitor.
Replace the defective tire and the sealant container of the Mobility System as soon as possible.
BMW X3 Service & Repair Manual > Brakes: Brake pedal with linkage
REPLACING SPRING FOR BRAKE PEDAL
Necessary preliminary work:
Remove trim panel for pedal mechanism .
Disconnect return spring (1).
REPLACING SPRING FOR CLUTCH PEDAL
Necessary preliminary work:
Remove trim panel for pedal mechanism .
Disconnect return spring (1).
...