Bodywork contact between vehicles
Make sure that there is no contact between the bodywork of the two vehicles; otherwise, there is a danger of short circuits.
1. Check whether the battery of the other vehicle has a voltage of 12 volts. This information can be found on the battery.
2. Switch off the engine of the assisting vehicle.
3. Switch off any electronic systems/power consumers in both vehicles.
Starting aid terminals
Connecting order
Connect the jumper cables in the correct order to prevent risk of injury from arcing.
The so-called starting aid terminal in the engine compartment acts as the battery's positive terminal.
The body ground or a special nut acts as the battery negative terminal.
BMW X3 Service & Repair Manual > Automatic transmission: Synchronising key
Synchronising key Minimum set: Mechanical tools AM
Storage Location
A46
Synchronising key Minimum set: Mechanical tools AM
NOTE:
Transmission: GA6L45R (GM6) Liquidation of existing inventory and then
available only as a complete tool set 24 2 350 (83 30 0 494 201) - as of
06.06.2012.
S ...