Observe procedure for REPAIR STAGE 3.
Read contents of BODY, GENERAL.
Following new body parts are required (refer to OVERVIEW OF CONSUMABLES):
Mark severance cuts in accordance with specified dimensions and cut.
IMPORTANT: Cut outer panel only for following severance cuts.
Dimension a = approximately 380 mm in front of Ø 20 mm hole.
Dimension b = approximately 360 mm before separating cut a.
Open welded connections in areas (1).
Installation note: Mark new part in accordance with severance cuts on vehicle and cut.
Weld in REINFORCEMENT PLATES at severance cuts.
BMW X3 Service & Repair Manual > Transmission in general: Universal transmission retaining bridge
Special tools required:
00 1 450
24 0 200
NOTE:
The transmission retaining bridge 24 0 200 is suitable for both manual and
automatic transmissions
IMPORTANT:
Adapters and spindles must be adapted for positive locking to the transmission.
(Risk of injury)
Adapt adapters (1) an ...