NOTE: Read contents of BODY, GENERAL.
Side wall removed.
Transfer the systematic diagram onto the respective holder version.
General information: Procedure OBSERVE repair stage 2! Following new body parts are required:
Following CONSUMABLES are required:
Removal of side wall holder (variant 1): Release welded connections in areas (1) and remove holder (2).
Preparation of new part: Adjust new part in conjunction with side panel in front to fit.
In area of bonding surfaces (1), set 2 4.2 mm dia. bore holes (2) for blind rivetsN3.
Remove new part and deburr holes.
IMPORTANT: Do not grind bonding surfaces down or off.
Installation of side wall holder: Clean all bonding surfaces with cleaning agent R1.
Apply adhesive to bonding surfaces.
Install new part and rivet with blind rivets.
Removal of side wall holder (variant 2): Release welded connection in area (1) and remove holder (2).
Preparation of new part: Fit in new part.
In area of adhesive surface (1), drill a 4.2 mm dia. bore hole (2) for blind rivet N3.
Remove new part and deburr holes.
IMPORTANT: Do not grind bonding surfaces down or off.
Installation of side wall holder: Clean all bonding surfaces with cleaning agent R1.
Apply adhesive to bonding surface.
Install new part and rivet with blind rivet.
BMW X3 Owners Manual > Maintenance: Condition Based Service
CBS
Sensors and special algorithms take into account
the driving conditions of your vehicle.
Based on this, Condition Based Service recognizes
the maintenance requirements.
The system makes it possible to adapt the
amount of maintenance corresponding to your
user profile.
Detailed informati ...