IMPORTANT: Do not damage adjoining body components.
The graphics are schematic representations and are to be applied to the relevant vehicle type.
Release screw on connector frame.
NOTE: Secure door against closing.
Release screw (1) on door stop.
Open door up to limit position.
Release screws between both hinge elements at top and bottom.
Pull plug connection from door post, unlock by pulling out bar and detach.
Unhinge door by moving upwards and placing it on a suitable surface.
Installation: If necessary, adjust DOOR.
BMW X3 Service & Repair Manual > Rear trim panel: Replace tail panel outer section and inner center section
Read contents of BODY, GENERAL.
STRIP DOWN vehicle.
Observe procedure of REPAIR STAGE 3.
Following new body parts are required
(1) Rear trim, outer skin
(2) Rear trim, inner
Following CONSUMABLES are required:
Removing the tail panel outer section and inside center section
O ...