WARNING: Support engine compartment lid in fully opened position with suitable apparatus. Risk of injury.
Necessary preliminary tasks: Remove left-hand GAS PRESSURE SPRING for engine compartment lid REMOVE left microfilter housing cover
Shown on left side. Right side identical.
Remove filter cover (1) in direction of arrow.
Installation note: Ensure that latch mechanisms on the microfilter housing cover (1) are correctly seated under retaining lugs on microfilter housing (2).
Retaining lugs on microfilter housing (2) must be neither bent nor damaged.
Position suitable cloths (1) without any play under engine compartment lid.
IMPORTANT: Make sure the engine compartment lid is supported!
Release nuts (1) and remove partition wall (2).
IMPORTANT: After screws have been slackened no lateral forces must be exerted on the engine compartment lid!
Release screws (1).
Release screws (1) and remove hinge (2).
Installation note: ADJUST hinge together with engine compartment lid.
REMOVING AND INSTALLING/REPLACING RIGHT HINGE FOR ENGINE COMPARTMENT LID
Operation is identical to removing and installing "LEFT HINGE FOR ENGINE COMPARTMENT LID".
BMW X3 Service & Repair Manual > Shift valves, parking lock: Replacing mechatronics (GA8HP45Z)
Special tools required:
24 1 430
24 2 390
IMPORTANT:
Do not let skin come in contact with transmission oil and do not inhale transmission oil
vapors.
Wear protective gloves.
Ensure adequate ventilation.
NOTE: After completing repair work:
Load specific data s ...