WARNING: If the engine hood/bonnet contact is pulled upwards (workshop mode), the information "switch closed" is output. The automatic engine start-stop function is active.
An automatic engine start is possible.
Observe safety precautions when working on MSA vehicles.
Before carrying out practical work on the engine, always ensure that the MSA functionality is deactivated so as to prevent automatic engine starting while work is being carried out in the engine compartment.
MSA function is deactivated by:
- Workshop mode
A = 10 mm- Basic setting (engine hood/bonnet open)
B = 7 mm
To make sure that the engine hood/bonnet contact is at the basic setting, if necessary press the hood/bonnet contact up to the limit position before starting work and slowly release.
BMW X3 Service & Repair Manual > Front axle: Pin
Pin AM
NOTE: (Replacement pins) Deletion, only available via tool set
Pin Minimum set: Mechanical tools AM
Replaced by: 83302213023
NOTE: Spare part set for basic device (2 locking pins and 1 O-ring) will be available
under a new order number 83 30 2 213 023 as of July 2011
SI number
01 16 ...