Necessary preliminary tasks:
After completing repair work: BLEED BRAKING SYSTEM.
Press brake pedal down to floor and secure with pedal support.
NOTE: The pedal support may only be released when the brake lines are reconnected.
This prevents brake fluid from emerging from the expansion tank and air from entering the system when the brake lines are opened.
Detach brake hose (1) from brake caliper.
If necessary, grip at knurling (2).
Release retaining screw (1). If necessary, grip at square head.
Installation note: Position guides (3) correctly in holder (4).
Release brake hose from holders (1).
Unscrew holder (2).
IMPORTANT: Observe assembly sequence:
- Fasten brake hose in holders (1).
- Move wheels into straight-ahead position.
- Fasten brake hose at pipe/brake hose connection.
- Fasten brake hose at brake caliper.
Never twist brake hose when installing it and avoid all contact with parts attached rigidly to the body.
BMW X3 Service & Repair Manual > Body repair instructions: Stamping vehicle identification number (needle stamping unit)
Read and comply with GENERAL INFORMATION.
The needle stamping system 360 - VRM - BMW is required to stamp the vehicle identification number.
Order number: 81 43 2 155 736
The needle stamping system 360 tool set comprises:
(1) Display
(2) Mains adapter
(3) Needle stamping unit
(4) Co ...