Special tools required:
IMPORTANT: Vehicles must not be driven without tension struts.
Driving without trailing links may damage the vehicle body.
trailing links can be secured with screws or nuts.
Screws must be tightened to specified torque and then tightened down to specified angle of rotation with special tool 00 9 120 .
Necessary preliminary tasks:
Release screws (1).
Lever out cable clip (2).
Remove cover (3).
Unfasten cable clip (3).
Release screws (1).
Remove trailing link (2).
Installation note: Replace screws (1), tighten to specified torque and then to angle of rotation.
BMW X3 Owners Manual > Tire Pressure Monitor TPM: Actions in the event of a flat tire
Normal tires
1. Identify the damaged tire.
Do this by checking the air pressure in all
four tires.
If the tire inflation pressure in all four tires
is correct, the Tire Pressure Monitor may
not have been initialized. In this case, initialize
the system.
If an identification is not possib ...