BMW X3 Service & Repair Manual: Tool set

BMW X3 Service & Repair Manual / Driveline+Axles / Front axle / Tool set

Tool set Mechanical tool

NOTE: Retrofit - for authorised BMW dealers who have already received the special tool 31 0 000 from SPX

SI number

01 19 10 (674)

Driveline+Axles

Tool set AM

Driveline+Axles

NOTE: Threaded spindle set for removing and installing the rubber mount on the rear axle support.

SI number

08 06 10 (658)

Consisting of:

4 = 2208574

3 = 2208575

Tool set AM

Driveline+Axles

NOTE: Adapter kit 2 (BMW), (BMW-specific adapters), for installation and removal of wheel bearings, propeller shafts and drive shafts.

SI number

08 12 14 (155)

Consisting of:

1 = 2159721

14 = 2159722

18 = 2156282

17 = 2156283

2 = 2159723

16 = 2156275

15 = 2156273

13 = 2156280

12 = 2156279

11 = 2156278

10 = 2156277

Tool set AM

Driveline+Axles

NOTE: A set of the BMW hydraulic tool system for wheel bearings and output shafts (basic set for BMW, consisting of 81 64 2 155 744, 81 64 2 155 745, 81 64 2 155 746)

SI number

08 12 14 (155)

Tool set AM

Driveline+Axles

NOTE: Hydraulic unit (basic unit) for removal and installation of wheel bearings, propeller shafts and drive flanges.

SI number

08 12 14 (155)

Consisting of:

2 = 2156247

1 = 2156246

Tool set Minimum set: Mechanical tools AM

Driveline+Axles

In conjunction with: 2357190

NOTE: For positioning the support bearing on the spring strut of the front axle Fitting aid that replaces (blocked) tool 31 0 000

SI number

01 19 10 (674)

Consisting of:

1 = Gauge

NOTE: For positioning the support bearing.

2 = Battery

NOTE: commercially available battery 3V lithium (CR 123A)

3 = Locating fixture

NOTE: For attaching and aligning the laser on the spring strut.

4 = Laser

5 = Mirrors

NOTE: 1 set (2 units) replacement for prism 83 30 2 210 780

7 = Measurement aid

NOTE: Prism with mirror, for aligning the laser beam.

Tool set AM

Driveline+Axles

NOTE: Wheel bearing adapter kit 1 (BMW), (spindles and tensioning nuts) for removal and installation of wheel bearings, propeller shafts and drive flanges.

SI number

08 12 14 (155)

Consisting of:

15 = 2156262

14 = 2159720

13 = 2156257

12 = 2156256

11 = 2318476

10 = 2159986

9 = 2159985

1 = 2156252

2 = 2156253

3 = 2156254

4 = 2156255

5 = 2156258

6 = 2156260

7 = 2156265

8 = 2156271

16 = 2156270

Tool

Tool Mechanical tool NOTE: Clamping plate As of 08/2011, the previous special tool 31 3 353 receives this new item number SI number 01 16 ...

Washer

Washer AM NOTE: (Flanged washer) For centring of threaded spindle and as a support disc for removing and installing the rubber mount in the f ...

Other materials:

BMW X3 Owners Manual > Saving fuel: Remove unnecessary cargo
Additional weight increases fuel consumption. Remove attached parts following use Remove auxiliary mirrors, roof or rear luggage racks which are no longer required following use. Attached parts on the vehicle impair the aerodynamics and increase the fuel consumption. Close the windows and ...