BMW X3 Service & Repair Manual: Maintenance service reminder reset - procedure 1
1. To reset instrument cluster SIA OIL SERVICE indicator, turn ignition switch to ON position. Connect Service Indicator Resetter (62 1 110) to diagnosis connector in engine compartment.
2. Press Yellow OIL SERVICE button. Green LED will illuminate. Wait until Yellow LED illuminates and then goes out again. Ensure that OIL SERVICE indicator has been reset.
3. To reset SERVICE INTERVAL indicator, press Red INSPECTION service button for inspection. Green LED illuminates. Wait until Red LED illuminates and then goes out again. Turn ignition switch to OFF position, wait 20 seconds and repeat procedure in order to adapt interval of annual inspection to inspection. Ensure that SERVICE INTERVAL indicator has been reset.
Maintenance service reminder
NOTE:
This is sometimes referred to as the "Oil Change Light" or "Oil Service Light".
NOTE:
The service indicator can only be reset using the r ...
Maintenance service reminder reset - procedure 2
Reset service light by performing the following:
1. Ignition key must be in OFF position.
2. Press and hold trip odometer reset button in the inst ...
Other materials:
BMW X3 Owners Manual > FTM Flat Tire Monitor: The concept
The system detects tire inflation pressure loss
on the basis of rotation speed differences between
the individual wheels while driving.
In the event of a tire inflation pressure loss, the
diameter and therefore the rotational speed of
the corresponding wheel changes. This will be
detected an ...
BMW X3 Owners Manual
BMW X3 Service & Repair Manual
