BMW X3 Service & Repair Manual: Tire pressure monitor system reminder

BMW X3 Service & Repair Manual / DTC / Tire pressure monitor system reminder

NOTE: If a tire pressure has been adjusted, or a wheel or tire has been changed or replaced, or repairs have been made to air spring suspension, the TPM system must be reinitialized. System must be reinitialized both before and after pulling a trailer.

CAUTION: When driving with snow chains or a space-saver spare tire, DO NOT initialize the system.

NOTE: To determine the appropriate reset procedure, refer to TIRE PRESSURE MONITOR SYSTEM REMINDER INDEX. Only vehicles listed in this index have a TPMS reset.

TIRE PRESSURE MONITOR SYSTEM REMINDER INDEX

DTC

DTC

Maintenance service reminder reset - procedure 6
CBS Reset Using BMW Diagnosis System IMPORTANT: Although the CBS maintenance jobs can be reset using in-car controls, it is recommended that t ...

Tpms reminder reset - procedure 1
1. Set the tire pressure on all wheels to specification. 2. Turn ignition switch to ON position, with engine off. 3. Press reset button (for no ...

Other materials:

BMW X3 Service & Repair Manual > Rear sub-frame: Removing and installing complete rear axle support
WARNING: Danger of injury! Failure to comply with the following instructions may result in the vehicle slipping off the vehicle hoist and critically injuring other persons. Load the luggage compartment with a minimum of 100 kg before lowering/removing the rear axle support. When supporting ...

BMW X3 Owners Manual

BMW X3 Service & Repair Manual

© 2017-2024 Copyright www.bmwx3tech.com - 0.0297