BMW X3 Service & Repair Manual: Removing and installing alternator (N52T)

BMW X3 Service & Repair Manual / Electrical / Alternator with drive and mounting / Removing and installing alternator (N52T)

IMPORTANT: Aluminum-magnesium materials.

No steel screws/bolts may be used due to the threat of electrochemical corrosion.

A magnesium crankcase requires aluminum screws/bolts exclusively.

Aluminum screws/bolts must be replaced each time they are released .

Aluminum screws/bolts are permitted with and without color coding (blue).

For reliable identification: Aluminum screws/bolts are not magnetic .

Jointing torque and angle of rotation must be observed without fail (risk of damage) .

Necessary preliminary work:

  • Switch off ignition.
  • Disconnect BATTERY EARTH LEAD .
  • Remove INTAKE SILENCER HOUSING .
  • Remove ALTERNATOR DRIVE BELT .

Release connector (1) and remove.

Slacken nut (2).

Installation note:

Disconnect positive battery cable from alternator.

Release screws (3) and remove alternator.

Installation note:

Replace aluminum screws.

Electrical

Assemble engine.

    Alternator with drive and mounting
    ...

    Removing and installing or replacing alternator (N20, N26)
    Necessary preliminary tasks: Switch off ignition Disconnect BATTERY EARTH LEAD and cover. Remove INTAKE SILENCER HOUSING . Remove CLEAN AIR ...

    Other materials:

    BMW X3 Owners Manual > Displays: Current fuel consumption
    Display Depending on your vehicle's optional features, the current fuel consumption can be displayed as scale with mechanical pointer or as digital bar display in the lower area of the tachometer. The current consumption displays the current fuel consumption. Check whether you are curre ...

    BMW X3 Owners Manual

    BMW X3 Service & Repair Manual

    © 2017-2024 Copyright www.bmwx3tech.com - 0.0302