Storing
1. Switch on the ignition.
2. Set the desired position.
3. Press button. The LED in the button lights up.
4. Press selected button 1 or 2 while the LED is lit. The LED goes out.
If the SET button is pressed accidentally:
Press button again.
The LED goes out.
BMW X3 Service & Repair Manual > Body repair instructions: Notes on adhesive K2
IMPORTANT: Note the following information before starting to apply adhesive!
Country-specific safety and industrial safety regulations
Material safety data sheet of manufacturer
Processing instructions on glue cartridge
Storage:
Dry, at 15 ºC - 25 ºC.
Shelf life:
The ...