BMW X3 Service & Repair Manual: Removing and installing/replacing intake silencer for independent/auxiliary heater

BMW X3 Service & Repair Manual / HVAC / Auxiliary. heater with control elements / Removing and installing/replacing intake silencer for independent/auxiliary heater

WARNING: Risk of burning! Work on auxiliary heater may only be carried out when it has cooled down.

Necessary preliminary work:

  • Remove FRONT LEFT WHEEL ARCH COVER

Removal:

Pull air intake hose (1) off stationary/auxiliary heater.

Unclip intake silencer (2) in marked area.

HVAC

Installation:

NOTE: The mounting clip on the intake silencer must not be damaged!

Clip in intake silencer (2) in marked area.

Connect air intake hose (1) to stationary/auxiliary heater.

HVAC

Required reworking:

  • Mount FRONT LEFT WHEEL ARCH COVER
    Removing and installing/replacing complete electric auxiliary heating
    Risk of burning! Carry out repair work only after engine has cooled down. Necessary preliminary work: Remove SUPPORT FOR DASHBOARD Fold up th ...

    Removing and installing/replacing silencer (auxiliary heater)
    WARNING: Risk of burning! Work on auxiliary heater may only be carried out when it has cooled down. Necessary preliminary work: REMOVE FRONT LEF ...

    Other materials:

    BMW X3 Service & Repair Manual > Oil pressure/oil temperature/oil gauge: Replacing engine oil level sensor (N52T)
    IMPORTANT: Read and comply with notes on PROTECTION AGAINST ELECTROSTATIC DISCHARGE (ESD PROTECTION) . Necessary preliminary work: Switch off ignition. Remove REINFORCEMENT PLATE . Drain ENGINE OIL . Release connector (1) and remove. Unscrew nuts. Remove oil level sensor ( ...

    BMW X3 Owners Manual

    BMW X3 Service & Repair Manual

    © 2017-2020 Copyright www.bmwx3tech.com - 0.0087