BMW X3 Service & Repair Manual: Replacing desiccant insert for air conditioning system
WARNING: Danger of injury! Refrigerant circuit is under high pressure!
- Follow safety instructions for handling R 134a refrigerant .
- Avoid contact with refrigerant and refrigerant fluid.
IMPORTANT: Risk of damage! Restart engine only when A/C system has been correctly filled.
FOLLOW instructions for opening and replacing parts in refrigerant circuit.
If air conditioning system is opened for more than 24 hours: replace desiccant insert for air conditioning system
Follow INSTRUCTIONS ON REPLACING DESICCANT INSERT .
Necessary preliminary tasks:
- Remove CONDENSER
Undo the plastic screw connection (1).
Remove the desiccant insert (1).
Installation note: Replace the sealing ring (3) on the plastic screw connection (2).
After installation:
EVACUATE AND FILL A/C SYSTEM
Removing and installing or replacing capacitor for heating and air
conditioning system
Special tools required:
00 9 030
WARNING: Danger of injury!
Refrigerant circuit is under high pressure!
Avoid contact with refrigerant and re ...
Replacing safety pressure switch
WARNING: Danger of injury!
Refrigerant circuit is under high pressure!
Follow safety informations for handling R 134a refrigerant .
Avoid contact ...
Other materials:
BMW X3 Service & Repair Manual > Support members: Replacing engine support with left wheel arch in front of bulkhead
Observe procedure of REPAIR STAGE 3.
Read contents of BODY, GENERAL.
Spot-weld bonding is used on this vehicle. Observe specific procedure .
Use only approved SPOT-WELDING APPARATUS for repairs.
Place vehicle on straightening bench.
Following new body parts are required (refer to OVE ...