BMW X3 Service & Repair Manual: Hose

Hose AM

NOTE: (connecting hose) For connecting the pressure cylinder to the filler adapter

HVAC

NOTE: (Connecting hose) discontinued, available as part of set of special tools only

HVAC

NOTE: (Connecting hose) discontinued, available as part of set of special tools only

HVAC

NOTE: (Connection hose with clamp)

SI number

01 04 08 (435)

HVAC

NOTE: (Connecting hose) discontinued, available as part of set of special tools only

HVAC

LABELS

Labels AM

NOTE: (Official mark, grey (5 pieces))

MANDREL

Mandrel Mechanical tool

NOTE: (fitting mandrel) For the fitting keys in the drive shaft of the swash plate compressor

Storage Location

A6

HVAC

MEASURING DEVICE

Measuring device Mechanical tool

NOTE: (Precision spring balance) For preloading the temperature blending flap for heating and air conditioning

Storage Location

C1

HVAC

PIN WRENCH

Pin wrench Mechanical tool

NOTE: For releasing the belt pulley on the vane-type compressor (slotted nut)

Storage Location

X4

HVAC

    Extractor
    Extractor Mechanical tool NOTE: For the thrust washer in the front housing cover of the swash plate compressor Storage Location B12 Extractor ...

    Pliers
    Pliers Mechanical tool NOTE: (clamping pliers) For removing and fitting the clutch disc of the air conditioning compressor Storage Location Z10 ...

    Other materials:

    BMW X3 Service & Repair Manual > Output shafts: Removing and installing/replacing both output shafts
    IMPORTANT: The RADIAL SHAFT SEAL FOR THE OUTPUT SHAFT should be renewed every time the output shaft is removed and installed. The circlip of the output shaft must be replaced after re-installation. NOTE: The procedure is described in PRESSING OUTPUT SHAFT OUT OF DRIVE FLANGE AN ...

    BMW X3 Owners Manual

    BMW X3 Service & Repair Manual

    © 2017-2021 Copyright www.bmwx3tech.com - 0.0056