BMW X3 Service & Repair Manual: Notes on repairing threads (A)

IMPORTANT: Install Helicoil thread inserts so that they are flush with the original thread!

NOTE: Damaged threads may be repaired with Helicoil thread inserts. Observe the PROCEDURE described in the example.

Suspension

Notes on repairing threads (B)

IMPORTANT: Install Helicoil thread inserts so that they are flush with the original thread.

NOTE: Damaged threads on the engine support may be repaired with Helicoil thread inserts. Follow the procedure described in the example.

Suspension

Procedure:

1. Create a clean core hole; if necessary, drill out screw remnants

Suspension

2. Create locating thread for Helicoil thread insert

Suspension

3. Pick out Helicoil thread insert in accordance with the TABLE and screw into the locating thread until flush with the original thread

Suspension

4. Break drive pin and remove

Suspension

OVERVIEW OF FRONT AXLE DIFFERENTIAL/OUTPUT SHAFTS

Suspension

Suspension

    Mobile table lift
    WARNING: Danger of injury! Before beginning work, position table lift with the lower frame securely on the floor. Danger area around mechanism be ...

    Raising vehicle with trolley jack
    Observe the following trolley-jack-related instructions: 1. Only trolley jacks sold or approved by BMW, with a rubber plate on their mounting, may ...

    Other materials:

    BMW X3 Service & Repair Manual > Engine electrical system: Socket wrench
    Socket wrench AM NOTE: For screw with internal serrations (Hazet 8808 lg10) Storage Location A49 SOCKET WRENCH INSERT Socket wrench insert AM NOTE: (Torx socket wrench insert T20) Socket wrench insert Minimum set: Mechanical tools Mechanical tool NOTE: (Socket wrench insert WAF 24) For rem ...

    BMW X3 Owners Manual

    BMW X3 Service & Repair Manual

    © 2017-2020 Copyright www.bmwx3tech.com - 0.0088